欢迎来到中科聚峰机械有限公司!

24小时服务热线:

400-879-1999

点击拨打服务热线:400-879-1999
当前位置:首页>新闻中心>公司动态如何防止搅拌车卡死?

如何防止搅拌车卡死?

来源:http://www.jfhntjbj.com/ 日期:2021-04-16 发布人:admin
概述:如果每天使用自动上料搅拌车,您会发现罐体越来越小。这是因为如果不清洁,材料会粘附在储罐壁上。接下来,如何防止水箱粘在一起。
如果每天使用自动上料搅拌车,您会发现罐体越来越小。这是因为如果不清洁,材料会粘附在储罐壁上。接下来,如何防止水箱粘在一起。
If you use the automatic feeding mixer every day, you will find that the tank is getting smaller and smaller. This is because if it is not cleaned, the material will adhere to the tank wall. Next, how to prevent the tanks from sticking together.
1.将减水剂带到汽车上
1. Bring water reducer to the car
减水剂是一种混凝土外加剂,可以在不改变混凝土坍落度的情况下减少混合过程中使用的水量,并且可以携带到汽车上以很好地调节混凝土。但是,如果添加减水剂,则需要记住,在商用混凝土站的实验室中有人。否则,混凝土将强度不足,驾驶员将不得不承受后果。
Superplasticizer is a kind of concrete admixture, which can reduce the amount of water used in the mixing process without changing the slump of concrete, and can be carried to the car to adjust the concrete well. However, if you add superplasticizer, you need to remember that there are people in the laboratory of a commercial concrete station. Otherwise, the concrete will not be strong enough and the driver will have to bear the consequences.
2.返回工厂检查水箱中的水量
2. Return to the factory to check the water quantity in the water tank
下火车返回车站时,请检查储水箱中的水量,并始终保持充满,以防万一。
When you get off the train and return to the station, please check the water in the water storage tank and always keep it full, just in case.
3.出厂前检查混凝土质量
3. Check the concrete quality before delivery
每个混凝土板的质量可能会因原料不同而有所差异。在安装混凝土并离开现场时,有必要检查储罐中的混凝土坍落度及其容易程度,并注意混凝土的预设和分层。
The quality of each slab may vary depending on the material. When installing concrete and leaving the site, it is necessary to check the slump and ease of concrete in the tank, and pay attention to the pre setting and stratification of concrete.
4.减少车辆行驶时间
4. Reduce vehicle travel time
具体的运输距离通常在直径30公里以内。离开车辆之前,请规划路线和车辆交通,以最大程度地减少车辆在路上的时间。
The specific transportation distance is usually within 30 km in diameter. Before leaving the vehicle, please plan the route and vehicle traffic to minimize the vehicle time on the road.
5.首先减少损失和排放
5. Reduce losses and emissions first
每当遇到导致长期卸货的人为因素或不可抗力时,都应检查储罐中混凝土的状况。只要混凝土开始变硬,就需要检查。为防止整个油箱被丢弃,请在向负责人​​报告后立即将其排放。
The condition of the concrete in the tank should be checked whenever there are human factors or force majeure that lead to long-term unloading. As soon as the concrete starts to harden, it needs to be checked. To prevent the whole tank from being discarded, please discharge it immediately after reporting to the person in charge.
以上是防止罐从自动上料搅拌车粘住的方法。一旦掌握,就可以大大避免此问题,提高工作效率并减少材料损失。
The above is to prevent the tank from sticking from the automatic feeding mixer. Once mastered, it can greatly avoid this problem, improve work efficiency and reduce material loss.

截屏,微信识别二维码