自动搅拌车的安装调试是设备使用之前不可少要经过的一个环节，不能够忽视，不然放过一个问题就会造成设备的使用不顺。那么自动搅拌车的安装调试怎么样？

　　The installation and debugging of automatic mixing truck is an indispensable link to go through before the use of the equipment. It can not be ignored, otherwise a problem will cause the use of the equipment is not suitable. So how about the installation and debugging of the automatic mixer?

　　自动搅拌车安装的设计选型与搅拌功课目标严密连系，各类分歧的搅拌进程需求由分歧的搅拌安装运转来完成，在设计选型时依据工艺对搅拌功课的目标和要求，确定搅拌器型式、电念头功率、搅拌速度，然后选择减速机、机架、搅拌轴、轴封等各部件。

　　Car installation design and selection of automatic stirring lesson objectives for connecting and process requirements by the differences of all kinds of differences of stirring operation to complete the installation, when designing the selection according to the process of mixing work goals and requirements, determine the agitator type, thought electric power, stirring speed, and then select the speed reducer, frame, stirring shaft, shaft seal parts, etc.

　　依照工艺前提、搅拌目标和要求，选择搅拌器型式，选择搅拌器型式时应充沛掌握搅拌器的动力特征和搅拌器在搅拌进程中所发生的运动形态与各类搅拌目标的因果关系。

　　The agitator type should be selected according to the process premise, mixing objectives and requirements. When selecting the agitator type, the dynamic characteristics of the agitator and the causal relationship between the movement pattern of the agitator in the mixing process and various mixing objectives should be fully grasped.

　　依照所确定的搅拌器型式及搅拌器在搅拌进程中所发生的运动形态，工艺对搅拌夹杂工夫、沉降速度、涣散度的节制要求，经过实行伎俩和核算机模仿设计，确定电念头功率、搅拌速度、搅拌器直径。

　　According to the determined stirrer type and stirrer in the process of mixing in the movement of the form, the process of mixing time, sedimentation speed, lax control requirements, after the implementation of tactics and accounting machine imitation design, determine the power of the electric idea, stirring speed, stirrer diameter.

　　依照电念头功率、搅拌转速及工艺前提，从减速机选型表中选择确定减速机机型。假设依照实践任务扭矩来选择减速机，则实践任务扭矩应小于减速机许用扭矩。

　　According to the electric power, stirring speed and process premise, from the reducer selection table to select and determine the reducer model. If the reducer is selected according to the practical task torque, the practical task torque should be less than the allowable torque of the reducer.

　　依照减速机的输出轴头d和搅拌轴系支承方法选择与d一样型号规格的机架、联轴器。依照装置方式和构造要求，设计选择搅拌轴构造型式，并校检其强度、刚度。

　　According to the output shaft head D of the reducer and the supporting method of the stirring shafting, choose the frame and coupling of the same model and specifications as D. According to the device and structure requirements, the structure type of mixing shaft is designed and selected, and its strength and stiffness are checked.

　　在以上进程中，自动搅拌车搅拌安装的组合、装备可参考，装备进程中各部件之间衔接枢纽尺寸是轴头尺寸，轴头尺寸一致的各部件准则上可交换、组合。

　　In the above process, the combination and equipment of automatic mixer installation can be referred to. The connecting hub size between various parts in the equipment process is the shaft head size, and the parts with the same shaft head size can be exchanged and combined.

　　当我们在进行搅拌机安装工作的时候，它的调试部分是非常的重要的，要是大家在之前不清楚应该怎样做的话可以先来网站www.jfhntjbj.com进行咨询，这样做不容易出差错！

　　When we are installing the blender, its debugging part is very important. If you are not clear about how to do it before, you can consult the website www.jfhntjbj.com first, which is not easy to make mistakes!