搅拌一体车门的自动加载以及焊接和焊接实际上都粘在密封条上，这也是保证密封的操作。不然，这些缝隙很简单被外面的风沙沙粒填满，引起腐蚀等。下面来了解一下搅拌一体车密封条该怎样保护。

The automatic loading, welding and welding of the mixing integrated door are actually adhered to the sealing strip, which is also the operation to ensure the sealing. Otherwise, these gaps are simply filled by the sand particles outside, causing corrosion, etc. Now let's learn how to protect the sealing strip of the mixer.

检查搅拌一体车密封是否有大的裂缝和裂缝。如果密封破损，可以用粘合剂修复。特别是，通过使用特殊的粘合剂进行密封，很容易填充大的裂缝带。当然，如果密封件严重损坏或老化，请更换新密封件。

Check whether there are large cracks and cracks in the seal of the mixer. If the seal is broken, it can be repaired with adhesive. In particular, large crack bands can be easily filled by sealing with a special adhesive. Of course, if the seal is seriously damaged or aging, please replace it with a new one.

用混凝土拌和清洁剂清洁门窗密封条后，驱动程序会施加一层渗透性保护剂，以避免密封条老化，并大大提高密封条的密封功能。除此之外，挡风雨条之间的空隙很简单充溢尘埃和铁锈。为此，请使用刷子清除尘埃。

After cleaning the door and window sealing strip with concrete mixing detergent, the driver will apply a layer of permeable protective agent to avoid the aging of the sealing strip and greatly improve the sealing function of the sealing strip. In addition, the gaps between the weather strips are simply filled with dust and rust. To do this, use a brush to remove the dust.

车门与车身的密封是一个比较困难的部位，密封要求比较严，应密封的部分比较长，各密封部位的断面形状不尽相同，而且车门启闭频繁。在搅拌车上常设置3道,4道密封，安装前支柱及车顶侧横梁部位的四重密封的构造。这种多道密封一般都布置在前门缝里，除具有密封功能外，还有汽车隔音降噪的作用。

The sealing between the door and the vehicle body is a relatively difficult part. The sealing requirements are relatively strict. The part to be sealed is relatively long. The cross-sectional shape of each sealing part is different, and the door is opened and closed frequently. The mixer truck is often provided with three and four seals, and the four seals at the front pillar and roof side beam are installed. This multi-channel seal is generally arranged in the seam of the front door. In addition to the sealing function, it also has the function of automobile sound insulation and noise reduction.

车窗玻璃损坏后，驾驶员应在替换玻璃时查看密封条是否损坏。因为修理后窗户常常不能康复到其原始形状，因而除了保证能够简单地拉动或提起窗户玻璃外，还需要注意窗户玻璃周围的密封。假如玻璃和玻璃容器之间的空隙不均匀，则橡胶条与玻璃和玻璃容器的接触不良，驾驶员能够轻松地用手拉动密封圈。

After the window glass is damaged, the driver should check whether the sealing strip is damaged when replacing the glass. Since the repaired window often cannot recover to its original shape, in addition to ensuring that the window glass can be easily pulled or lifted, it is also necessary to pay attention to the sealing around the window glass. If the gap between the glass and the glass container is not uniform, the rubber strip has poor contact with the glass and the glass container, and the driver can easily pull the sealing ring by hand.

司机在换车顶时，应先在车顶周边压合处涂一层导电密封胶，待焊好后再在流水槽内及接缝处遍涂折边胶，这不但有助于车身的密封，更可防止车身因翻边焊缝处积水而产生早期锈蚀。更多相关事项的了解您可以来我们网站http://www.jfhntjbj.com咨询！

When changing the roof, the driver should first apply a layer of conductive sealant at the press joint around the roof, and then apply the folding adhesive in the gutter and at the joints after welding. This not only helps the sealing of the vehicle body, but also prevents the early corrosion of the vehicle body due to water accumulation at the flanging welds. You can visit our website for more information http://www.jfhntjbj.com consulting service