自动上料搅拌车如今是很多建筑用地所必备的设备，为了不会在使用期间出现什么问题，操作人员会在使用之前对其进行相应的检查，下面小编就来给您讲讲相关的事项。

The automatic feeding mixer is now an essential equipment for many construction sites. In order to avoid any problems during use, the operator will check it before use. The following section will tell you about relevant matters.

做好安全措施，防止装料的搅拌车坏在路上。混凝土需要不停的搅动以防止凝固，如果出现故障导致搅拌罐停转，很容易出现闷罐。一般停罐不能超过2个小时，C40往上级别的混凝土基本就不能停。

Take safety measures to prevent the mixer truck from being damaged on the road. The concrete needs to be stirred constantly to prevent solidification. If the mixing tank stops due to a failure, it is easy to become stuffy. Generally, the tank can't be stopped for more than 2 hours, and the concrete of C40 level can't be stopped basically.

启动自动上料搅拌车前，须先检查机油、润滑油和冷却水等物料是否充足，及时进行添加。

Before starting the automatic feeding mixer, check whether the materials such as engine oil, lubricating oil and cooling water are sufficient and add them in time.

车子启动后，低速旋转罐体，绕车一周检测胎压，防止有漏气车胎，用工具拿掉卡在轮胎中石子等杂物。

After the car starts, rotate the tank at a low speed and test the tire pressure around the car to prevent the tire from leaking. Use tools to remove stones and other debris stuck in the tire.

其次检验灯光是否正常，务必保证照着轮胎边缘，防止被工地堆放的钢筋杂物割伤。清理干净后视镜和窗户玻璃，司机保持清晰开阔视野，以应对工地的复杂工况场景。

Secondly, check whether the light is normal. Make sure to shine on the edge of the tire to prevent it from being cut by the rebar and sundries stacked on the construction site. Clean the rearview mirror and window glass, and the driver shall keep a clear and wide view to cope with the complex working conditions of the construction site.

此外水可以应对混凝土物料干燥无法卸料的情况，减水剂也是同理，防止闷罐。发动机启动时罐子如果处于高速旋转状态，瞬间的力会非常大，容易使减速机磨损，降低使用寿命。

In addition, water can deal with the situation that the concrete materials are dry and cannot be unloaded. The same is true of water reducer to prevent the tank from being stuffy. If the tank rotates at high speed when the engine starts, the instantaneous force will be very large, which will easily wear the reducer and reduce its service life.

关于使用前要检查搅拌车各部件是否正常这一检查事项的了解就到这里了，您对此有什么想咨询的就来我们网站http://www.jfhntjbj.com进行详细的了解吧！

That's all we need to know about the inspection items of checking whether all parts of the mixer are normal before use. If you have any questions about this, please come to our website http://www.jfhntjbj.com Have a detailed understanding!