对于自动搅拌车卸料的注意事项一定要牢记，这样才能延长搅拌车的使用寿命，可以带给我们更多收益的!下面小编为您讲解一番。

We must remember the precautions for automatic mixer truck unloading, so as to prolong the service life of the mixer truck and bring us more benefits! Here's a brief introduction.

在装料时建议不要装太满，要预留一些空间让粉粒扩容，要注意在装料时避免一些杂物混入搅拌罐内，因为这样会使卸料管堵塞，影响卸料速度和剩余率。

It is recommended not to be too full during loading. Some space should be reserved to allow the powder particles to expand. Attention should be paid to avoid some sundries from mixing into the mixing tank during loading, because this will block the discharge pipe and affect the discharge speed and residual rate.

卸料过程中，应观察压力表压力变化情况，如压力突然上升，而输气软管堵塞，不再出料，应停止送气并放出管内压气，然后清除堵塞。

During the unloading process, observe the pressure change of the pressure gauge. If the pressure rises suddenly and the gas transmission hose is blocked, and the discharge is stopped, stop the air supply and discharge the air pressure in the pipe, and then remove the blockage.

卸料作业时，空气压缩机应有专人负责，其他人员不得擅自操作。在进行加压卸料时，不得改变内燃机转速。

During the unloading operation, the air compressor shall be in the charge of a specially assigned person, and other personnel shall not operate without authorization. The speed of the internal combustion engine shall not be changed during pressurization and unloading.

卸料结束，应打开放气阀，放尽罐内余气，并关闭各部阀门。车辆行驶过程中，罐内不得有压力。

At the end of unloading, open the vent valve to vent the residual gas in the tank and close all valves. There shall be no pressure in the tank when the vehicle is running.

在卸料后冲洗车辆时，上下扶梯须抓紧扶手，身体严禁接触转动部位。冲洗完车辆后要将水箱阀门关闭，固定好卸料槽及水管。

When washing the vehicle after unloading, grab the handrail when getting on and off the escalator, and do not touch the rotating parts. After washing the vehicle, close the water tank valve and fix the discharge chute and water pipe.

自动搅拌车卸料的几个注意要点就讲解到这里了，您对此有什么需要注意的事项就来我们网站http://www.jfhntjbj.com咨询了解吧！

Here are some key points for automatic mixer truck unloading. If you have anything to pay attention to, please come to our website http://www.jfhntjbj.com Ask and understand!