Even if long-term use of mechanical equipment (such as automatic feeding mixer), but also from time to time lubrication to maintain good performance. So what do you need to pay attention to when adding lubricant to the equipment?

1.在操作过程中，切勿对自动电源混合器进行大修和润滑。

1. Never overhaul or lubricate the automatic power mixer during operation.

2.定期润滑每个注油嘴，每4小时给轴端密封圈注脂一次，并每周排放一次污水。

2. Lubricate each oil nozzle regularly, grease the seal ring of shaft end every 4 hours, and discharge sewage once a week.

3.使用自动搅拌车后，根据需要在每个润滑点添加所需的润滑油（辊轴，辊，钢丝绳和其他运动部件）。

Add lubricating oil to each roller and other parts as needed 

4.自动搅拌车减速器的齿轮箱的齿轮和轴承利用齿轮的旋转将油溅到箱内壁上，并流入轴承中进行润滑。变速箱中的油位应保持在油尺上的两条刻线之间。如果油位太高或太低，则每个零件的温度都会升高，润滑会不足，从而导致功率损耗增加，机器运行速度变慢。

4. The gear and bearing of the gearbox of the reducer of the automatic mixer truck splash the oil on the inner wall of the box by the rotation of the gear, and flows into the bearing for lubrication. The oil level in the transmission should be maintained between the two lines on the dipstick. If the oil level is too high or too low, the temperature of each part will rise and the lubrication will be insufficient, which will lead to the increase of power loss and the slow running speed of the machine.

5.为自动搅拌车选择的润滑油必须具有特定的粘度和粘度-温度特性，低凝固点，良好的氧化稳定性，无机械杂质和湿气，腐蚀和磨损材料。有。其质量指标必须符合标准。

5. The lubricating oil selected for automatic mixer must have specific viscosity and viscosity temperature characteristics, low freezing point, good oxidation stability, no mechanical impurities and moisture, corrosion and wear materials. yes. Its quality index must conform to the national standard.

自动搅拌车是为了有效减少磨损并提高组件的使用寿命。但是，添加润滑油时要小心。新机器每前150和300小时应更换一次机油，以调试期间未完全的污垢。在工作时要经常检查油位，以弥补您的时间不足。

The purpose of automatic mixer is to effectively reduce wear and improve the service life of components. However, be careful when adding lubricating oil. For new machines, the oil should be changed every 150 and 300 hours to remove the dirt not completely removed during commissioning. Always check the oil level at work to make up for your lack of time.