概述：为了提高自动搅拌车制动系统的可靠性，系统对以下5部分进行升级：In order to improve the reliability of the automatic agitato
为了提高自动搅拌车制动系统的可靠性，系统对以下5部分进行升级：
In order to improve the reliability of the automatic agitator braking system, the following five parts are upgraded:
(1)自动上料搅拌车制动气压管由单管改为双管，提高了系数。
(1) The brake pressure tube of automatic feeding agitator is changed from single tube to double tube, which improves the safety factor.
(2)增加空气压缩机与组合阀的铁管长度，采用多个 U形布置，以提高输出空气的冷却效果，装载机减轻组合阀门橡胶密封的老化。
(2) Increase the length of the iron pipe of the air compressor and the combined valve, and adopt a plurality of U-shaped layout to improve the cooling effect of the output air, and the loader to reduce the aging of the rubber seal of the combined valve.
(3)将目前使用的组合阀更换为带干燥器的调压器，并将其更换为自动上料搅拌车损坏后的维修策略。
(3) Replace the current combined valve with the regulator with dryer, and replace it with the maintenance strategy after the damage of the automatic feeding mixer.
(4)自动上料拌和车在气顶油制动系统中，加力器是一个非常关键的部件，其储液罐要加一个报警装置。可采用以下两种结构：采用液位报警器，利用浮体和舌簧开关检测制动液液面高度，并及时报警；采用行程报警，如果加力器活塞行程过大，说明制动系统有故障。
(4) In the gas top oil braking system of automatic feeding and mixing vehicle, the afterburner is a very key component, and an alarm device should be added to the liquid storage tank. The following two structures can be used: liquid level alarm, using floating body and tongue spring switch to detect the brake fluid level height, and timely alarm; Using stroke alarm, if the piston stroke of the afterburner is too large, it indicates that the braking system is faulty.
(5)将目前使用的
自动搅拌车组合阀更换为带干燥器的调压器，以减少储气罐的积水。
(5) Replace the combined valve of the current automatic mixer truck with the regulator with dryer to reduce the water in the gas storage tank.
(2) Increase the length of the iron pipe of the air compressor and the combined valve, and adopt a plurality of U-shaped layout to improve the cooling effect of the output air, and the loader to reduce the aging of the rubber seal of the combined valve.
(3) Replace the current combined valve with the regulator with dryer, and replace it with the maintenance strategy after the damage of the automatic feeding mixer.
(4) In the gas top oil braking system of automatic feeding and mixing vehicle, the afterburner is a very key component, and an alarm device should be added to the liquid storage tank. The following two structures can be used: liquid level alarm, using floating body and tongue spring switch to detect the brake fluid level height, and timely alarm; Using stroke alarm, if the piston stroke of the afterburner is too large, it indicates that the braking system is faulty.
(5) Replace the combined valve of the current automatic mixer truck with the regulator with dryer to reduce the water in the gas storage tank.
点击拨打服务热线：400-879-1999
