自动搅拌车在建筑工程上使用较多，对搅拌车了解不深的，对搅拌车的组成可能就是底盘和罐子，但是如果你想购买搅拌车，那就要对搅拌车多做了解，以方便选购，今天小编就给大家普及一下自动搅拌车各部件的基本内容。

Automatic mixers are widely used in construction projects, but they don't know much about mixers. The composition of mixers may be chassis and tanks. However, if you want to buy mixers, you need to know more about mixers to facilitate purchase. Today's mini series will give you a general introduction to the basic contents of various parts of automatic mixers.

搅拌筒是整个三轮底盘搅拌车的关键部件，作为存储混凝土的容器，对防止其固化、离析起着决定性的作用。它由拌筒体、托轮等组成。筒体由前锥段、后锥段、圆柱段、封头、叶片、进料小锥、滚道等组焊而成,前端与减速机连接在一起，后部通过托轮支撑在副车架上。

The mixing drum is the key part of the whole three wheel chassis mixer truck. As a container for storing concrete, it plays a decisive role in preventing its solidification and segregation. It is composed of mixing barrel, supporting wheel, etc. The cylinder is composed of front cone section, rear cone section, cylinder section, head, blade, feed cone, raceway, etc. by assembly and welding. The front end is connected with the reducer, and the rear is supported on the subframe through the supporting wheel.

托轮起支撑滚筒体的作用，由支座、轴承座、轴、轴承等组成。搅拌筒的壳体及叶片都由高强度钢板制作而成，具有更高的耐磨性。经过优化设计的搅拌筒，还具有可靠的结构刚度，良好的耐磨性能，流畅地进出料，低的残留量，既可搅拌混凝土，又可搅动输送预拌混凝土，决无出料离析现象，保障了混凝土的匀质性能。

The supporting roller plays the role of supporting the roller body and is composed of a support, a bearing seat, a shaft, a bearing, etc. The shell and blades of the mixing drum are made of high-strength steel plates, which have higher wear resistance. The optimized mixing drum also has reliable structural stiffness, good wear resistance, smooth feeding and discharging, and low residue, which can not only mix concrete, but also stir and transport ready mixed concrete without segregation, ensuring the homogeneity of concrete.

进出料装置由进料斗、出料斗、主卸料槽、副卸料槽、支架、锁紧架等组成，是三轮底盘搅拌车的重要组成部分，直接影响到进出料的速度和质量,进、出料斗通过支架和副车架的后台支撑架相连。

The feeding and discharging device is composed of a feeding hopper, a discharging hopper, a main discharging chute, a auxiliary discharging chute, a bracket, a locking frame, etc. It is an important part of a three wheel chassis mixer, which directly affects the speed and quality of feeding and discharging. The feeding and discharging hoppers are connected with the background support frame of the auxiliary frame through the bracket.

操纵系统：主要由控制器、联动轴、软轴及连杆机构组成，主要控制搅拌罐的转速及旋转方向。

Operating system: mainly composed of controller, linkage shaft, flexible shaft and linkage mechanism, which mainly controls the speed and direction of rotation of the mixing tank.

托轮系统：搅拌罐后部与副车架连接的部位，主要起支撑罐体的作用。

Supporting wheel system: the part at the rear of the mixing tank connected with the subframe, which is mainly used to support the tank body.

进料系统：主要是由进料斗与支架组成，进料斗由于冲击磨损较大，材料要求耐磨性好，支架主要起到减轻冲击力的作用。

Feeding system: It is mainly composed of a feeding hopper and a support. Due to the large impact wear of the feeding hopper, the material is required to have good wear resistance. The support is mainly used to reduce the impact force.

电路系统：主要控制整车的电路，比如尾灯，侧标志灯、示廓灯、冷却风扇电机等。

Circuit system: mainly controls the circuit of the whole vehicle, such as tail lamp, side marker lamp, position lamp, cooling fan motor, etc.

对于自动搅拌车各部件的基本认识就到这里了，您要注意平常使用时要定期对其进行维护保养，延长它的使用寿命。更多注意事项就来我们网站http://www.jfhntjbj.com看看吧。

That's all for the basic understanding of the components of the automatic mixer. You should pay attention to the regular maintenance of the automatic mixer during normal use to extend its service life. More notes on our website http://www.jfhntjbj.com Take a look.