Automatic feeding mixer after the completion of the operation, how to correctly place, but also we should master a common sense. If the automatic feeding mixer is placed unreasonably, it is likely to cause certain losses, such as forgetting to close the window in summer, wetting the cab of the mixer in a storm, and causing damage to the power supply. How to place the automatic feeding mixer after it stops working, let's learn about it.

1、自动上料搅拌车在停止工作后操作人员将各种手柄置于空挡或中间位置。

1. After the automatic feeding mixer stops working, the operator puts all kinds of handles in neutral or middle position.

2、自动上料搅拌车应停在平地上，并将铲斗平放地面。当发动机熄火后，需反复多次扳动工作装置操纵手柄，确保各液压缸处于无压休息状态。当自动上料搅拌车只能停在坡道上时，要将轮胎垫牢。

2. The automatic feeding mixer should stop on the flat ground and lay the bucket flat on the ground. When the engine is off, it is necessary to repeatedly pull the operating handle of the working device to ensure that each hydraulic cylinder is in a non pressure rest state. When the automatic feeding mixer can only stop on the ramp, the tires should be firmly padded.

3、自动上料搅拌车严禁停在有明火或高温地区，以防轮胎受热爆炸，引起事故。

3. It is strictly forbidden to park the automatic feeding mixer in the area with open fire or high temperature, so as to prevent the tire from explosion due to heating and causing accidents.

4、先取走电锁钥匙，然后关闭电源总开关，关闭门窗。

4. First take away the key of the electric lock, then turn off the main power switch, and finally close the doors and windows.

自动上料搅拌车在使用过程中应该按照操作规程去操作，同样，在工作结束后也要按照合理的放置要求去停放，尽量避免因为我们的疏忽而发生故障或者损坏其部件，减少其使用寿命。

The automatic feeding mixer should be operated according to the operation rules in the process of use. Similarly, it should be parked according to the reasonable placement requirements after the work, so as to avoid failure or damage to its parts due to our negligence and reduce its service life.