Automatic mixer truck is a kind of special driving vehicle, which has a specific working environment, so it is inevitable that the engine water temperature is too high. Whenever this happens, it will have a specific impact on the device. What if the water temperature is too high? Then the editor will tell you.

1.在正常道路上，自动搅拌一体车的发动机过热，因此应尽快减速，在树荫下行驶，或在相对凉爽的地方行驶并停止。此时不要急着拖延。

1. On the normal road, the engine of the automatic mixer truck is overheated, so it should slow down as soon as possible, drive in the shade of trees, or drive in a relatively cool place and stop. Don't delay at this time.

2.打开发动机盖，以怠速运转发动机，然后等待发动机温度逐渐恢复正常。当发动机的水温恢复正常时，请停止发动机。之后，请稍等片刻，直到发动机水温充分下降，然后检查发动机冷却水量。

2. Open the engine cover, run the engine at idle speed, and then wait for the engine temperature to gradually return to normal. When the water temperature of the engine returns to normal, stop the engine. After that, please wait for a moment until the engine water temperature drops sufficiently, and then check the engine cooling water volume.

3.此时，自动混水车发动机的冷却水量可能会严重不足。在补充指定量的冷却水后，可以再次检查冷却系统以确认没有其他异常，然后可以启动发动机并继续运行。另外，检查水箱的百叶窗没有被异物堵塞，风扇叶片是否运转，发动机皮带没有打滑以及发动机水泵是否运转。

3. At this time, the cooling water of the engine of the automatic mixer may be seriously insufficient. After replenishing the specified amount of cooling water, the cooling system can be checked again to confirm that there are no other abnormalities, and then the engine can be started and continue to run. In addition, check that the blinds of the water tank are not blocked by foreign matters, whether the fan blades are running, whether the engine belt is not slipping, and whether the engine water pump is running.

上面的编辑介绍的有关知识是关于自动搅拌一体车小型上水温过高的处理方法，我想每个人都对此有所了解。如果遇到此问题，可以使用上面的方法适当地它。

The above editor introduced the relevant knowledge about the treatment method of high water temperature in small automatic mixer truck, which I think everyone knows. If you encounter this problem, you can use the above method to solve it properly.