搅拌车的生产需要正确的底盘和正确的顶部才能完成。底盘来自底盘企业制造商，然后在搅拌车改装厂进行改装。今天，我们将普及搅拌车的改装知识，尤其是改装后的搅拌车需要符合几点要求。

The production of mixer truck requires correct chassis and correct top. The chassis comes from the chassis brand manufacturer, and then is modified in the mixer truck modification plant. Today, we will popularize the modification knowledge of the mixer truck, especially the requirements that the modified mixer truck needs to meet.

自动搅拌车改造部分应留有足够的维修空间，特别是润滑点、紧固螺栓、电池和制动部件的操作空间。

Sufficient maintenance space shall be reserved for the reconstruction part of the automatic mixer, especially the operation space for lubrication points, fastening bolts, batteries and braking components.

允许改变发动车的冷却系统，但不能妨碍进气和排气。

It is allowed to change the cooling system of the engine, but the air intake and exhaust shall not be obstructed.

安装改装件时，总成及各部件必须保证通过、操作、可靠、功能齐全、维修方便。

When installing the modified parts, the assembly and all components must ensure safe passage, safe and reliable operation, complete functions and convenient maintenance.

当改装件伸出驾驶室上方时，驾驶室应能自由翻转。

When the refitted parts protrude above the cab, the cab shall be able to turn freely.

改造后的搅拌车的驱动、制动和转向性能不受影响。

The driving, braking and steering performance of the modified mixer truck will not be affected.

改造后的搅拌车外形尺寸不得超过限值，后悬挂不得超过标准限值。

The overall dimension of the reconstructed mixer truck shall not exceed the limit value, and the rear suspension shall not exceed the standard limit value.

此外改装前要符合一定的和监管限制要求，比如：搅拌车改装后的总质量不得超过大允许总质量，各轴轴重质量不得超过大允许轴重质量。应尽可能低，但必须有足够的空间来容纳车轮弹跳高度。改装后的搅拌车应保证维修方便。

In addition, before refitting, certain safety and regulatory restrictions shall be met. For example, the total mass of the refitted mixer shall not exceed the maximum allowable total mass, and the axle weight of each axle shall not exceed the maximum allowable axle weight. The center of gravity should be as low as possible, but there must be enough space to accommodate the wheel bounce height. The modified mixer truck shall ensure convenient maintenance.

不得随意改变搅拌车轴距。对于加长、缩短车架纵梁、改变横梁位置等特殊情况，必须咨询底盘部技术人员，避免改装出现质量问题。改造后的自动搅拌车必须符合现行法律法规的要求。

Do not change the wheelbase of the mixer at will. For special cases such as lengthening, shortening the longitudinal beam of the frame and changing the position of the transverse beam, the technical personnel of the chassis department must be consulted to avoid quality problems in the modification. The reformed automatic mixer truck must meet the requirements of current national laws and regulations.

希望以上所讲可以帮助到您，更多相关的信息您可以来关注我们网站http://www.jfhntjbj.com，联系客服人员，为您讲解更多更为详细的内容或者问题，让您在此有所获取！

I hope the above can help you. For more relevant information, you can follow our website http://www.jfhntjbj.com , contact the professional customer service personnel to explain more and more detailed contents or questions for you, so that you can get some information here!