自动搅拌车是用来运送混凝土的转用车,在对它进行操作的时候需要注意一些问题,以免操作不当会引起翻车、液压泵、马达、减速机过快磨损甚出现严重后果。
The automatic mixer is a transfer vehicle used to transport concrete. When operating it, some problems should be paid attention to, so as not to cause rollover, hydraulic pump, motor, reducer to wear too fast or even serious consequences.
1.自动搅拌车应停入在平地上,并将铲斗平放地面。当发动机熄火后,需反复多次扳动工作装置操纵手柄,确保各液压缸处于无压休息状态。当自动搅拌车只能停在坡道上时,要将轮胎垫牢。
1. The automatic mixer shall stop on the flat ground and place the bucket on the ground. When the engine is off, pull the operating handle of the working device repeatedly to ensure that each hydraulic cylinder is in a pressure free rest state. When the automatic mixer can only stop on the ramp, the tire shall be firmly padded.
2.自动搅拌车在停止工作后操作人员将各种手柄置于空挡或中间位置。
2. After the automatic mixer stops working, the operator will place various handles in the neutral or middle position.
3.先取走电锁钥匙,然后关闭电源总开关,关闭门窗。
3. Remove the electric lock key first, then turn off the main power switch and close the doors and windows.
4.自动搅拌车严禁停在有明火或高温地区,以防轮胎受热爆炸,引起事故。
4. It is forbidden to park the automatic mixer in the area with open fire or high temperature to prevent the tire from being heated and exploding, which may cause accidents.
5.利用组合阀或储气罐对轮胎进行充气时,人不得站在自动搅拌车轮胎的正面,以防爆炸伤人。
5. When inflating the tire with the combination valve or air receiver, people shall not stand on the front of the tire of the automatic mixer to prevent explosion.
The above is the information about the five points of attention for automatic mixer truck to prevent serious consequences. Safety is the most important, so you should pay more attention to high quality construction content under the premise of ensuring safety. Follow us http://www.jfhntjbj.com Tell you more!