诸如自动搅拌车之类的车辆设备通常在外表上有一层油漆，以更好地维护车辆的外部和外部。因为涂料在正常操作期间很容易损坏，掉漆后的自上料搅拌车不仅仅是影响美观，更是影响车的长久使用。因而以下内容将介绍如何维护自动搅拌车涂料不受损坏。

Vehicle equipment such as automatic mixer truck usually has a layer of paint on the surface to better maintain the exterior and exterior of the vehicle. Because the paint is easy to be damaged during normal operation, the self loading mixer after paint falling not only affects the appearance, but also affects the long-term use of the vehicle. Therefore, the following contents will describe how to maintain the paint of the automatic mixer from damage.

自动搅拌车的金属涂层出现十分细的裂纹，而且裂纹继续浸透涂层，直到其浸透到整个涂层为止。假如裂纹中包含蜡，则身体上会出现条纹。定期打蜡能够逐步减少裂纹。

Very fine cracks appear in the metal coating of the automatic mixer, and the cracks continue to penetrate the coating until they penetrate the whole coating. If the crack contains wax, stripes will appear on the body. Regular waxing can gradually reduce cracks.

自动搅拌车在露出于阳光的紫外线下会蒸发并维护空气中的油，随着时刻的消逝，涂料会过度涣散。油漆外表的亮度和深度大大下降，油漆外表逐步变白，构成氧化层，缩短了油漆寿数。假如自动搅拌车的油漆外表被严峻氧化，则能够经过研磨和抛光对其进行处理。

The automatic mixer will evaporate and maintain the oil in the air under the ultraviolet light exposed to the sun. With the passage of time, the coating will be excessively lax. The brightness and depth of the paint surface are greatly reduced, and the paint surface gradually turns white to form an oxide layer, which shortens the life of the paint. If the paint surface of the automatic mixer is severely oxidized, it can be treated by grinding and polishing.

因为自动搅拌车，外表出现磨损。可能是昆虫，鸟粪，树汁，柏油和沥青所致。一些小的蚀刻能够经过研磨和抛光解决。除了上述办法之外，为了有效地防止油漆溅到车辆上，在驾驶时有必要留意驾驶并防止碰撞和摩擦。不然会发作其他损坏。

Because of the automatic mixer, the appearance is worn. It may be caused by insects, bird droppings, tree sap, asphalt and asphalt. Some small etching can be solved by grinding and polishing. In addition to the above methods, in order to effectively prevent paint splashing on the vehicle, it is necessary to pay attention to driving and prevent collision and friction. Otherwise, other damage will occur.

自动搅拌车在太阳紫外线的照射下，漆膜会不断向空气中蒸发油份以达到保护自身的作用，长时间就会导致漆面油分的过分散失。漆面的亮度、深度都大打折扣，使漆面慢慢发白，形成氧化层，缩短了车漆的寿命，肉眼就可观察到车漆发乌、发白、无光泽等现象。

Under the ultraviolet radiation of the sun, the paint film of the automatic mixer will continuously evaporate oil into the air to protect itself, which will lead to excessive loss of paint oil for a long time. The brightness and depth of the paint are greatly reduced, which makes the paint slowly turn white and form an oxide layer, which shortens the service life of the car paint. The phenomenon of black, white and dull car paint can be observed with the naked eye.

自动搅拌车在行驶过程中由于摩擦而产生强烈的静电层，静电对灰尘、油污和化学粉尘吸附能力很强，时间长了会形成一层坚硬的交通膜，这种“交通膜”极易使漆面发生氧化腐蚀，这种情况可采用研磨抛光处理。

During the driving process of the automatic mixer, a strong electrostatic layer is generated due to friction. The static electricity has a strong adsorption capacity for dust, oil and chemical dust. Over a long time, a hard traffic film will be formed. This "traffic film" is very easy to oxidize and corrode the paint surface. In this case, grinding and polishing can be used.

自动搅拌车的掉漆的原因及处理分析便是以上内容了，如果您有什么想了解可以关注我们的网站www.jfhntjbj.com随时进行咨询。

The causes and treatment analysis of paint falling off of automatic mixer are the above contents. If you want to know anything, you can follow our website www.jfhntjbj.com Com at any time.