由于车辆的长期行驶，水箱和冷凝器的前部会堆积一些尘土、柳絮等杂物，当堆积过多时，如不及时清理，会直接影响水箱和冷凝器的散热功能。下面来讲讲自动搅拌车水箱水温升高的危害以及预防措施。

Due to the long-term driving of the vehicle, some dust, catkins and other sundries will accumulate in the front of the water tank and condenser. If the accumulation is too much, if not cleaned in time, it will directly affect the heat dissipation function of the water tank and condenser. Now let's talk about the harm of the rising water temperature in the tank of the automatic mixer and the preventive measures.

自动搅拌车水箱水温升高的危害。

Harm of rising water temperature in water tank of automatic mixer.

一、自动搅拌车水箱水温度过高的话会加快活塞的磨损，造成温度变化不匀称,会影响到自动搅拌车的动力；

1、 If the water temperature in the tank of the automatic mixer is too high, it will accelerate the wear of the piston, cause uneven temperature changes, and affect the power of the automatic mixer;

二、容易造成车缸垫被炽穿；

2、 It is easy to cause burning through of the cylinder cushion;

三、造成活塞环拉缸等等，环境严重的大概会造成自动搅拌车动员机损害。

3、 If the environment is serious, it may cause damage to the automatic mixer.

如何防备自动搅拌车水箱温度过高？

How to prevent the water tank temperature of automatic mixer from being too high?

1、经常查看水箱的水是否富裕或是漏水；

1. Always check whether the water tank is rich or leaking;

2、查看电子扇是否正常动弹；

2. Check whether the electronic fan works normally;

3、查看温度传感器是否有损坏；

3. Check whether the temperature sensor is damaged;

4、检查冷凝器管是否堵塞等等。

4. Check whether the condenser tube is blocked, etc.

因此，自动搅拌车司秘密经常做好车美容，以免车箱水温升高，粉碎车的动力机能，给车造成无法修补的伤害。

Therefore, the automatic mixer truck company secretly often does a good job of car grooming to prevent the water temperature in the car body from rising and the power function of the crushing truck from causing irreparable damage to the car.

炎热夏季经常会出现发动机温度过高，甚至开锅的现象，严重时，活塞与缸筒之间，由于活塞热量散不出去，膨胀过大，活塞与缸筒之间的间隙减少甚至消失，产生硬性拉动，造成拉缸，这点是十分重要的。更多相关事项了解就来咨询我们http://www.jfhntjbj.com！

In hot summer, the engine temperature is often too high, or even the boiler is boiling. In serious cases, the gap between the piston and the cylinder barrel is reduced or even disappeared due to the excessive expansion of the piston due to the heat that cannot be dissipated. This is very important. Please contact us for more information http://www.jfhntjbj.com ！