自动搅拌车在使用过程中防抱死系统出现故障，从而影响搅拌车的正常工作。为了能够尽快解决故障，我们须要先找出故障的原因，下面根据我公司从事搅拌车维修的经验来，来为大家介绍一下自动搅拌车防抱死系统出现故障时的检查方法。

The anti lock system of the automatic mixer fails during use, which affects the normal operation of the mixer. In order to solve the problem as soon as possible, we need to find out the cause of the problem first. Now, according to our company's experience in mixing truck maintenance, we will introduce the inspection method when the anti lock system of automatic mixing truck fails.

一、检查混凝土搅拌车的驻车制动是否完全释放。

1、 Check whether the parking brake of the concrete mixer is completely released.

二、检查制动储液罐液面是否符合说明书的规定。

2、 Check whether the liquid level of the brake fluid reservoir meets the requirements of the manual.

三、检查所有的制动管路有无损坏变形和泄漏迹象。

3、 Check all brake pipelines for damage, deformation and leakage.

四、检查防抱死系统的所有熔断丝是否完好,导线是否破损,插座是否牢固。

4、 Check whether all fuses of the anti lock system are in good condition, whether the wires are damaged and whether the sockets are secure.

五、检查蓄电池容量和电压是否符合规定,正负极导线的连接是否可靠。

5、 Check whether the capacity and voltage of the battery meet the requirements and whether the positive and negative electrodes are reliably connected.

六、检查防抱死系统、ECI_I插接器连接是否牢靠。

6、 Check the anti lock system and ECI_ I Check whether the connector is firmly connected.

七、检查电路连接处是否腐蚀、损坏、松脱或接触不良,ABS的各搭铁线搭铁是否可靠。

7、 Check the circuit connections for corrosion, damage, looseness or poor contact, and check whether the ABS grounding wires are grounded reliably.

八、检查轮胎是否符合要求。

8、 Check whether the tires meet the requirements.

九、检查混凝土搅拌车的车轮转动有无阻滞,轮毂轴承间隙是否正常。

9、 Check whether the wheels of the concrete mixer truck are blocked and whether the wheel hub bearing clearance is normal.

以上就是为大家介绍的有关自动搅拌车防抱死系统出现故障时的检查的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们http://www.jfhntjbj.com！

The above is a detailed introduction to the inspection of the anti lock system of the automatic mixer when it fails. I hope it will be helpful to you. If you have any questions, please contact us http://www.jfhntjbj.com ！