Mixer truck in use to a certain time, there will be some problems, so how to encounter these problems?

1、搅拌一体车自身的故障会影响混凝土搅拌机的工作效率。混凝土搅拌机的连杆、轴与衬板、可动颚板、偏心轴是主要的的磨损部件。生产过程中，应该经常观察磨损情况，及时修理或更换磨损件，也要注意在润滑点经常润滑。混凝土搅拌机工作效率还有排料口大小的调节。

1. The failure of mixer truck itself will affect the working efficiency of concrete mixer. The connecting rod, shaft and lining plate, movable jaw plate and eccentric shaft of concrete mixer are the main wear parts. In the production process, we should often observe the wear situation, repair or replace the worn parts in time, and also pay attention to frequent lubrication at the lubrication point. The working efficiency of concrete mixer and the adjustment of discharge port size.

2、在生产中，需更据排矿粒度的要求调节排矿口大小。在保证产品粒度的要求下，可把排矿口放大提高生产效率，排矿口大小可以通过调节块来调节。处理好生产率和破碎比之间的相互关系，可以使生产产量提高，大大提高了破碎生产线的生产经济效益。

2. In production, it is necessary to adjust the size of ore outlet according to the requirement of ore size. Under the requirement of ensuring the product size, the ore outlet can be enlarged to improve the production efficiency, and the size of the ore outlet can be adjusted by adjusting the block. If the relationship between productivity and crushing ratio is well handled, the production output can be increased and the economic benefit of crushing production line can be greatly improved.

3、搅拌一体车偏心轴的转数也会影响混凝土搅拌机的生产能力。搅拌机的偏心轴转数越快，单位时间内的电能消耗也会增加。会导致搅拌腔中已被破碎机的矿石来不及排出，从而产生堵塞现象。使得生产能力大大降低，也增加了机器的负荷情况。

3. The rotation number of eccentric shaft of mixer truck will also affect the production capacity of concrete mixer. The faster the eccentric shaft rotation of the mixer, the higher the power consumption per unit time. It will cause the ore in the mixing chamber which has been crushed by the crusher to be discharged too late, resulting in the blockage phenomenon. So that the production capacity is greatly reduced, but also increased the load of the machine.