自动搅拌车在化工工业中运用比较多比较广，很多的化工生产都或多或少地应用着搅拌操作，今天就简单来看下自动搅拌车的使用特点如何？

Automatic mixer truck is widely used in the chemical industry. Mixing operation is more or less used in many chemical production. Today, let's take a simple look at the use characteristics of automatic mixer truck?

自动搅拌车主要结构有行走底盘、发动机、液力变矩器、前后双驱动桥、上料装置、上料斗、出料斗、加长出料斗、车架、搅拌筒、搅拌专用减速机、液压系统、电控系统、自动供水系统等。在这里，小编将详细介绍自动上料搅拌机的一些特点。具体特点如下：

The main structures of the automatic mixer truck include walking chassis, engine, hydraulic torque converter, front and rear double drive axles, feeding device, feeding hopper, discharge hopper, extended discharge hopper, frame, mixing drum, special reducer for mixing, hydraulic system, electric control system, automatic water supply system, etc. Here, Xiaobian will introduce some characteristics of automatic feeding mixer in detail. The specific features are as follows:

搅拌车搅拌筒的转动是由电机通过专用行星减速机驱动。行星减速机的输出轴可摆动一定角度，以满足恶劣路况下搅拌筒的跳动。干料由铲臂、动臂油缸、定量料斗按设计配比自动进料。

The rotation of the mixing drum of the mixing truck is driven by the motor through a special planetary reducer. The output shaft of the planetary reducer can swing at a certain angle to meet the beating of the mixing drum under bad road conditions. The dry material is automatically fed by shovel arm, boom oil cylinder and quantitative hopper according to the design ratio.

液压系统采用恒功率变量柱塞泵，减少发动机功率损失。进水系统可根据计量设定实现自动进水。

The hydraulic system adopts constant power variable piston pump to reduce the power loss of the engine. The water inlet system can realize automatic water inlet according to the metering setting.

行走系统由发动机通过变矩器、前后驱动轴到前后桥组成。本发明采用前后双轴驱动形式。变矩器用于减少对发动机的冲击，延长发动机的使用寿命。

The traveling system consists of the engine passing through the torque converter, front and rear drive shafts to the front and rear axles. The invention adopts the form of front and rear double shaft drive. The torque converter is used to reduce the impact on the engine and prolong the service life of the engine.

自动搅拌车搅拌筒内壁设置双螺旋叶片。正转用于进料和混凝土搅拌；反向旋转，在螺旋叶片的带动下，混凝土从出料口排出。

Double spiral blades are arranged on the inner wall of the mixing drum of the automatic mixing truck. Forward rotation is used for feeding and concrete mixing; Reverse rotation, driven by the spiral blade, the concrete is discharged from the discharge port.

自动搅拌车可以适应融入多种复杂的工程施工情况，像是公路工程施工，城市便道工程施工，甚是沙面村路面等各种复杂的工程施工环境都完全都没有问题，而且别看这种搅拌车体形很大，但爬坡能力完全不比柴油汽车要差，关键是运行平稳定，不容易经常出现问题，可以很好的保证工程项目的进度，实际操作起来也非常的简单。

The automatic mixer truck can adapt to a variety of complex engineering construction conditions, such as highway engineering construction, urban access road engineering construction, and even the road surface of Shamian village. There is no problem in all kinds of complex engineering construction environment. In addition, although this kind of mixer truck has a large shape, its climbing ability is no worse than that of diesel vehicles. The key is that it runs smoothly and stably and is not prone to frequent problems, which can well ensure the progress of the project, The actual operation is also very simple.

自动搅拌车的维修成本费也相对比较来说低，这种搅拌车辆拌和车子由于使应用的燃然料相对比较来说，所以因此不用稀释润滑油脂也不会产生积碳，这对于车辆零件的磨损坏也是非常十分小的，同时对于保护车辆的柴油发动机也非常十分有好处，所以因此维修的成本费相对会低许多，同时车辆子的使用寿命也有所期也逐步提高。

The maintenance cost of automatic mixer truck is also relatively low. Due to the relatively environmental protection of the applied fuel and natural materials, this kind of mixer truck does not need to dilute the lubricating grease and will not produce carbon deposition, which is also very small for the wear of vehicle parts. At the same time, it is also very good for protecting the diesel engine of the vehicle. Therefore, the maintenance cost will be much lower, At the same time, the service life of the vehicle has also been improved gradually.

以上就是为大家总结的自动上料搅拌机的特点，希望对大家有所帮助。更多信息的获取您可以关注我们网站www.jfhntjbj.com！

The above is the characteristics of the automatic feeding mixer summarized for you. I hope it will be helpful to you. For more information, you can follow our website www.jfhntjbj.com com！