一个搅拌车轮胎价值数千元，如果使用不当导致非正常损耗，对搅拌车车主的资金可是不小的打击！那么减少搅拌车轮胎磨损就要关注什么事项？为此，小编总结几个减少搅拌车轮胎磨损小窍门，仅供参考。

A mixer tire is worth thousands of yuan. If it is improperly used, it will cause abnormal losses, which will be a great blow to the capital of the mixer owner! So what should we pay attention to to to reduce the wear of mixer tires? To this end, the editor summarizes several tips to reduce the wear of mixer tires for reference only.

关注胎面缺陷

Pay attention to tread defects

定时检查搅拌车轮胎表面有无裂纹、变形等缺陷。搅拌车轮胎的花纹沟由于行驶磨损而逐渐变浅，如果磨平就会失去排水防滑等作用，搅拌车各项性能将大大降低，而看似细小的裂纹更是高速行驶时爆胎的隐患。此外还要注意及时凹槽中的小石子。

Regularly check whether there are cracks, deformation and other defects on the tire surface of the mixer truck. The tread groove of the mixer tire will gradually become shallow due to driving wear. If it is ground flat, it will lose the function of drainage and skid resistance, and the performance of the mixer will be greatly reduced. The seemingly small cracks are the hidden danger of tire burst when driving at high speed. In addition, pay attention to the timely removal of small stones in the groove.

关注停车事项

Pay attention to parking matters

避免将搅拌车停放在有粗大、尖锐或锋利石子的路面上。搅拌车不要停放在靠近或接触有酸类物质及其他影响橡胶变质的物料的地方。搅拌车驾驶员不要在停车后转动方向盘，这样的操作会加速搅拌车轮胎的磨损。

Avoid parking the mixer on the road with coarse, sharp or sharp stones. Do not park the mixer near or in contact with acids and other materials that affect the deterioration of rubber. The mixer driver should not turn the steering wheel after parking. Such operation will accelerate the wear of the mixer tires.

关注耐磨度

Pay attention to wear resistance

多数人不知道，其实耐磨度是搅拌车轮胎的一项基本指标，不同于它的尺寸、承重以及速度级别的地方在于，耐磨指数并没有被标识于轮胎的胎肩，也许是因为耐磨指数并不像以上其他指标那样会直接影响到安装，或是对造成直接威胁。但有心的车主不妨上网或是通过其他一些途径了解搅拌车轮胎的耐磨指数这项指标，对于你挑选一款经久耐用的搅拌车轮胎应能起到参考的作用。

Most people don't know that, in fact, wear resistance is a basic indicator of the mixer tire. What's different from its size, load-bearing and speed level is that the wear index is not marked on the shoulder of the tire, perhaps because the wear index will not directly affect the installation or pose a direct threat to safety like the other indicators above. However, interested car owners may wish to know the wear index of mixer tires online or through some other ways, which should be a reference for you to choose a durable mixer tire.

关注路面情况

Pay attention to the road conditions

在公路维修施工地段行车时，应用低速缓行选择路面的办法通过，避免自动搅拌车轮胎受到过度碰击，甚被刺伤或划伤；在凹凸不平的道路上行车，一要选择路面，减轻搅拌车轮胎与路面的碰击，避免机件及轮胎的损坏；二要减速缓行，避免搅拌车轮胎颠簸和强烈震动；通过泥泞地段，应选择较坚实、不滑的地方通过，以免轮胎下陷、原地空转、剧烈生热造成搅拌车轮胎及胎侧严重割伤、划伤。

When driving in the road maintenance and construction section, the method of choosing the road surface at a low speed should be adopted to avoid the automatic mixer tire from being excessively bumped, or even stabbed or scratched; When driving on uneven roads, first, choose the road surface to reduce the collision between the mixer tire and the road surface and avoid the damage of machine parts and tires; Second, slow down and avoid the bumps and strong vibrations of the mixer tires; When passing through muddy areas, a solid and non slippery place should be selected to avoid serious cuts and scratches on the tire and sidewall of the mixer caused by tire subsidence, idling in place and severe heat generation.

此外搅拌车驾驶方法与轮胎磨损有很大关系。良好、熟练的驾驶技术能有效地减少搅拌车轮胎的磨损，延长搅拌车轮胎的使用寿命，同时提高行驶性。如对这一问题还存在任何疑问，都欢迎关注我们网站http://www.jfhntjbj.com并咨询我们的工作人员，将竭诚为您服务。

In addition, the driving method of mixer truck has a great relationship with tire wear. Good and skilled driving skills can effectively reduce the wear of mixer tires, prolong the service life of mixer tires, and improve driving safety. If you still have any questions about this issue, you are welcome to follow our website http://www.jfhntjbj.com And consult our staff, will serve you wholeheartedly.