自动搅拌车主要是用来运输施工混凝土的卡车，使用的圆柱形搅拌筒运输搅拌好的混凝土。在运输过程中，搅拌筒可以保持转动，这样可以让混凝土不会出现凝固现象。那么，您对搅拌槽部件有多少了解呢？

The automatic mixer truck is mainly used to transport construction concrete, and the cylindrical mixing drum is used to transport the mixed concrete. During transportation, the mixing drum can keep rotating so that the concrete will not set. So, how much do you know about the parts of the mixing tank?

搅拌罐是搅拌车的重要部件之一，要求的技术含量比较高，其技术含量会直接影响混凝土的质量，所以搅拌罐的设计比较高，公差范围要小。搅拌槽内的叶片一般我们使用的是双对数螺旋。

The mixing tank is one of the important parts of the mixer truck, which requires high technical content, which will directly affect the quality of concrete, so the design of the mixing tank is relatively high and the tolerance range is small. Generally, we use double logarithmic helix for the blades in the mixing tank.

搅拌槽内的叶片有效的提高了混凝土的卸料的性能，出料口前的叶片上一般都带有孔洞，这样可以有效的降低了混凝土对叶片的粘结性能，提高出料的平均性。整个叶片从搅拌罐底部的滑动角度不断增加，以确保叶片能充分搅拌混凝土，降低残留率。

The blades in the mixing tank effectively improve the discharge performance of concrete. The blades in front of the discharge port are generally equipped with holes, which can effectively reduce the bonding performance of concrete to the blades and improve the average discharge. The sliding angle of the whole blade from the bottom of the mixing tank continues to increase to ensure that the blade can fully mix the concrete and reduce the residue rate.

我们知道一般搅拌罐的材质都会使用到高强度的钢板，在搅拌罐成型后，拆下内支架，焊接叶片。焊接工艺我们一般使用的是碳氧化物保护膜，搅拌罐制作后进行喷丸处理，焊接和制作过程中产生的应力，提高镀层的附着力。

We know that generally, high-strength steel plates are used for the material of the mixing tank. After the mixing tank is formed, the inner support is removed and the blades are welded. We generally use carbon oxide protective film for welding process. Shot blasting is carried out after the production of stirring tank to eliminate the stress generated in the process of welding and production and improve the adhesion of coating.

此外搅拌筒是整个搅拌运输车的关键部件，作为存储混凝土的容器，对防止其固化、离析起着决定性的作用。它由拌筒体、托轮等组成。

In addition, the mixing drum is the key component of the whole mixing truck. As a container for storing concrete, it plays a decisive role in preventing its solidification and segregation. It is composed of mixing cylinder, supporting wheel, etc.

筒体由前锥段、后锥段、圆柱段、封头、叶片、进料小锥、滚道等组焊而成。前端与减速机连接在一起，后部通过托轮支撑在副车架上。托轮起支撑滚筒体的作用，由支座、轴承座、轴、轴承等组成。

The cylinder is assembled and welded by front cone section, rear cone section, cylindrical section, head, blade, feeding cone, raceway, etc. The front end is connected with the reducer, and the rear end is supported on the subframe through supporting wheels. The supporting wheel plays the role of supporting the drum body and is composed of support, bearing seat, shaft, bearing, etc.

搅拌筒的壳体及叶片都由高强度钢板制作而成，具有更高的耐磨性。封头整体一次旋压成形，与加强板焊接后具有足够的刚度与强度。

The shell and blades of the mixing drum are made of high-strength steel plates, which have higher wear resistance. The head is formed by one-time spinning and has sufficient stiffness and strength after welding with the reinforcing plate.

经过优化设计的搅拌筒，具有可靠的结构刚度，良好的耐磨性能，流畅地进出料，低的残留量，既可搅拌混凝土，又可搅动输送预拌混凝土，决无出料离析现象，确保了混凝土的匀质性能。

The optimized mixing drum has reliable structural rigidity, good wear resistance, smooth feeding and discharging, and low residue. It can not only mix concrete, but also agitate and transport ready mixed concrete. There is no discharge segregation phenomenon, ensuring the homogeneity of concrete.

关于自动搅拌车的搅拌槽部件使用知识讲解就是以上内容，相信大家一定对它更加感兴趣了吧，更多信息关注我们网站http://www.jfhntjbj.com咨询吧！

The explanation of the use of the mixing tank parts of the automatic mixer is the above content. I believe you will be more interested in it. For more information, please follow our website http://www.jfhntjbj.com Consult!