自动搅拌车这种机械设备在长时间的使用过程中，为了能够保持其良好的操作性能，则需要我们不定期的对其进行润滑工作。那么在对设备添加润滑油的过程中我们应该要注意哪些事项呢？

During the long-term use of mechanical equipment such as automatic mixer, in order to maintain its good operating performance, we need to lubricate it irregularly. What should we pay attention to in the process of adding lubricating oil to the equipment?

1、自动搅拌车在运转过程中不得检修和润滑。

1. The automatic mixer shall not be overhauled and lubricated during operation.

2、定期向各黄油嘴加注黄油，轴端密封处每4小时注润滑油一次，每周排污一次。

2. Regularly add grease to each grease fitting, inject lubricating oil to the shaft end seal every 4 hours, and blow down once a week.

3、自动搅拌车在使用后酌情对各润滑点加注必要的润滑油（滚轮轴、滚轮、钢丝绳等活动部位）。

3. After the automatic mixer is used, necessary lubricating oil (roller shaft, roller, steel wire rope and other moving parts) shall be added to each lubricating point as appropriate.

4、自动搅拌车减速箱的齿轮和轴承是利用齿轮回转将机油飞溅到箱体内壁，流入轴承中去进行润滑的。减速箱的油面应保持在油标尺两刻线之间为宜。油面过高或过低会导致各部温度升高或润滑不良，增加功率损耗和造成机器工作不良。

4. The gears and bearings of the reduction gearbox of the automatic mixer use the gear rotation to splash the oil onto the inner wall of the box and flow into the bearings for lubrication. The oil level of the reduction gearbox should be kept between the two scribed lines of the oil scale. Too high or too low oil level will cause temperature rise or poor lubrication of all parts, increase power loss and cause poor operation of the machine.

5、自动搅拌车选用的润滑油应具有一定购粘度和粘温特性，凝点低，抗氧化安定性良好，没有机械杂质和水分，不合腐蚀和磨损物质等。其质量指标应符合标准规定。

5. The lubricating oil selected for the automatic mixer shall have certain viscosity and viscosity temperature characteristics, low freezing point, good anti-oxidation stability, no mechanical impurities and moisture, and no corrosion and wear substances. Its quality indicators shall conform to the provisions of national standards.

自动搅拌车进行润滑工作是为了能有效减少磨损，提高元部件的使用寿命。不过在进行添加润滑油的过程中也要注意一些事项，新机开始使用头150小时和300小时要分别更换机油一次，以便排除试车时未完全洗净的污物。工作时，要经常检查油面高度，不足应及时添补。关注我们http://www.jfhntjbj.com，了解更多！

The lubrication of automatic mixer truck is to effectively reduce wear and improve the service life of components. However, in the process of adding lubricating oil, attention should also be paid to some matters. The engine oil should be changed once in the first 150 hours and 300 hours after the new machine is put into use, so as to remove the dirt that has not been completely cleaned during commissioning. During operation, the oil level shall be checked frequently, and any deficiency shall be supplemented in time. Follow us http://www.jfhntjbj.com Yes, learn more!