在投料搅拌过程中,
自动搅拌车搅拌主机因电流过大出现闷机跳闸,造成这种情况出现的原因是因为什么呢?我们又该如何呢?
In the process of feeding and mixing, the main mixing machine of the automatic mixer truck trips due to the blocking of the machine due to excessive current. What is the reason for this? How can we solve it?
胶带所受的外力再胶带宽度方向上的合力不为零或垂直于胶带宽度方向上的拉应力不均匀而引起的由于导致胶带跑偏的因素很多,故应从输送机的设计制造安装调试使用及维护等方面来着手胶带的跑偏,如胶带两侧的松紧度不一样胶带两侧的高低不一样托辊支架等装置没有安装与胶带运行方向的垂直截面上等都会引起皮带跑偏。
The external force on the belt and the resultant force in the width direction of the belt are not zero or the tensile stress in the direction perpendicular to the width direction of the belt is uneven, which is caused by many factors leading to belt deviation. Therefore, the belt deviation should be solved from the aspects of design, manufacture, installation, commissioning, use and maintenance of the conveyor, If the tightness of the two sides of the belt is different, the height of the two sides of the belt is different. If the idler bracket and other devices are not installed on the vertical section in the running direction of the belt, the belt will deflect.
1.投料过多,引起搅拌机负荷过大
1. Excessive feeding causes excessive load of mixer
2.搅拌系统叶片与衬板之间的间隙过大,搅拌过程中,增加了阻力
2. The gap between the blade and the lining plate of the mixing system is too large, which increases the resistance during the mixing process
![自动搅拌车](http://www.jfhntjbj.com/uploadfile/2022/1024/20221024031948496.jpg)
3.三角传动皮带太松,使传动系统效率低
3. The triangular drive belt is too loose, which makes the transmission system inefficient
4.搅拌主机上盖检修开关被振松,引起停机
4. The safety maintenance switch on the upper cover of the mixing machine is loosened, causing shutdown
处理过程:
Handling process:
1.检查配料系统是否超标和是否二次投料现象
1. Check whether the batching system exceeds the standard and whether there is secondary feeding phenomenon
2.检查搅拌机叶片与衬板之间的间隙是否在3~8mm
2. Check whether the clearance between the mixer blade and the lining plate is 3~8mm
3.检查传动系统三角皮带的松紧程度并调整检查主机上盖开关是否松动
3. Check the tightness of the V-belt of the transmission system and adjust it. Check whether the safety switch on the upper cover of the host is loose
That's all for dealing with the problem of the trip of the automatic mixer. If you have any questions or needs, please come to our website http://www.jfhntjbj.com Consult!